8' SRW service body including a ladder rack, strap tie downs, Rhino lined back of bed and bumper, rear hitch including a 7 way flat receptacle, front aluminum rock guards, interior compartment lights and powder coated white
9' Knapheide Contractor flat bed with ladder rack, hitch, storage tool boxes stake racks and Painted Black
Semi Service recently upgraded a semi chemical tanker with baffles so that it would be safer to operate by minimizing liquid slosh in the trailer
A custom build 14' flat bed, rear hitch, Tarp, Hoist to dump and a lift gate at the rear
Custom fabricated connecting gear
Semi Service fabricated some Tandem axle dollies, fifth wheels, extendable tongues, super singles and painted black
Before & After - Tank Repairs
Check out the damage and repairs made to a Non-code Stainless Steel Tank 4,000 Gallon
Western Snow Plow Open House at Semi Service
We had a great time at our Open House for Western Snow Plows! We're ready for winter!
Custom GM Van
GM Van, insulated walls with polyurethane, walls lined with Kemlit, diamond plate aluminum on the floors
All in one package - dump body, snow plow, and sander ready to go to work in the big snow storm SLC
Custom fabricated Premier 570 Pintle hook on a dry freight trailer with a slider suspension, safety loop, 7 way light plug, on/off glad hands, and electrical junction box.
Knapheide Service Body
Custom Ford F-350 with cab shield, Lincoln welder, Liftmore crane, manual outriggers, rear hitch and plug, and a Champion gas air compressor.
Knapheide 12' Flatbed
Custom job with Stellar hydraulic crane, hydraulic outriggers, Buyers aluminum tool boxes, and fabricated 6" aluminum removable sides.
9' CM Model RD Platform including a rear hitch, 7-way flat plug, and Western Prodigy 8' 7" snowplow.
9 'x 9" CM Aluminum flatbed including 12" fabricated removable sides and rear, tapered headboard, rear hitch, and a 7-way flat light receptacle.
Custom Fabricated Extended Bumper
Custom fabricated extended bumper assembly including air operated Pintle hitch option, hitch guides, electrical 7-way plug, junction box and air glad hands.
Before & After - MC-307 Tank Repairs
Rebuild of a MC-307 tanker including external ring sections, straightened barrel, pressure retesting, re-insulation, new external tank wrap skin, pump off-line, fenders, and brackets.
Frame & Axle
Frame cut down adding an additional air ride 3rd axle, extended rear frame, air valve, lights, and air.
Before & After - Refer Trailer
53' Greatdane Refer trailer re-build including new side posts, corrugated side skin, roof bows, aluminum roof, inside liners, and polyurethane foam.
Tanker repair including external walkway brackets, sandblast and paint complete, new fenders, HM 183 tank testing, and new reflective tape.
12' Rubgy Flatbed Sign body, LED lights, fabricated street sign racking, tread plat floor, HD square headboard, left-hand recessed step, rear hitch, 7-way flat light receptacle, right-hand and left-hand Buyers aluminum tool boxes.
Dry Freight Trailer
Stretching a 48’ Dry freight trailer out to 57’ with adding roof skin, roof bows, side panels, cross members, Flooring and lights and air.
Rugby platform installed on a Isuzu LCF, smooth steel floor, square headboard with a large window and a receiver hitch
Rubgy Dump Body
Rugby 9' Dump body including fold down sides, rear hitch assembly, Buyers right-hand and left-hand tool boxes, and strobe light.
Before & After - Propane Repairs
Before and after photos of a propane tank wreck that we rebuilt and painted
12' x 96" Rugby standard duty flatbed, fabricated rear platform bumper, sign/barricade racking and 16" right-hand and left-hand fold down sides, rear hitch, rear 7-way flat receptacle, Buyers LED work light at rear. Buyers fold-out step, Eco strobe lights and painted black.
Rugby Dump Body
Rugby 9' Dump Body with 17" solid sides, rear hitch including a 7-way flat receptacle, LED lights, mud flaps, Western 8.5' straight blade snow plow and a Buyers 9' in bed stainless steel salt spreader including an adjustable chute.
Reading Service Body
Reading 9' Service Body with oxygen and acetylene compartment, fabricated tray, spare tire mount, ladder rack, Buyers top side tool boxes for additional storage. Western mule bumper crane, Pipe vice, Wilton vice, rear hitch including 7-way flat receptacle, pull out drawers, power inverter, Rhino lined rear work bumper and LED lights.
Stahl Service Body
9' Stahl Service Body with flip tops, Rhino lining in payload area, compartment tops, and flip top lids. Receiver hitch and 7-way trailer plug, custom pull-out aluminum diamond plate pipe threader box. Custom fabricated pipe rack with Buyers bolt on ratcheting tie down straps, 3 per side, cord and ladder hooks, and spare tire holder
Crane Truck Flatbed
Crane truck with an 11' CM RD flatbed with 6" high removable sides, a 4,000lb Big Max Knuckle Boom crane and outriggers with an 18 x 36" Buyers toolbox and an underbody spare tire carrier.
Custom Knapheide Flatbed
9' duel rear wheel custom Knapheide flatbed with service body custom compartments, rear hitch, 7-way light receptacle, strobe light and right-handed trough.
Knapheide Custom Service Body
9' DRW Knapheide custom service body, fabricated 24" platform including headache rack and bottle holder, LED lights, rear hitch, rear 7-way flat receptacle, Rhino lined bumper, page rack right-hand side, strobe light mount, Miller welder,and auto crane 2000.
Custom Rugby Platform
12' Rugby Platform with fabricated 42" solid sides, painted black. Tommy Lift Gate 2000 including an aluminum platform, right-hand and left-hand pump and meters installed inside aluminum Pro Tech toolboxes, hydraulic tank behind the cab with hoses and stinger fitting plumbed towards the rear.
CM Aluminum SK Platform
8' 6" x 84" CM Aluminum SK model platform with rear receiver hitch including 7-way flat receptacle, LED lights, new 150 gallon transfer tank, Fill-Rite 12-volt fuel transfer pump, Speedaire compressor and strobe light.
12' Knapheide Cargo Hauler Platform, LED Lights, Rear receiver hitch, Weather guard Aluminum tool boxes, Vanair control panel for Generator, Start all, air compressor, Bottle gas retainer, Lube system including hose reels, Wilton Vice, HD Rear step bumper, C Tec Compartment drawers and Rhino lined bed and bumper, Richard Harris was the salesperson job well done.
Custom Diesel / Gas Body
This is a 12' CM Aluminum model RD flatbed, B & W bumper pull hitch, LED Lights, Custom Fuel delivery body including a custom Reel Cabinet for reels and pump control panel, 260 Gallon diesel fuel tank, 260 Gallon double walled Gasoline tank, 2 Husky auto nozzle 25 GPM, Betts Swivel flood lights, V mac Under hood 70 CFM Compressor including a 110' Air Reel, Buyers Aluminum tool boxes, fabricated drivers side access steps and 2 bolt down Propane Racks to hold (8) bottles per rack.
Portable trailer brine machine demo with Henderson Manufacturing and Dan Matuszak of Semi Service on 9-22-2016 with a customer making approximately 20,000 gallons of brine.
Snow Plow Open House 2016
Semi Service Inc.'s 4th annual Snow Plow Open House including vendors from Western Snow Plow, Henderson Manufacturing and Rugby TBEI. Lots of great customers, good food catered by Costa Vita, lots of new products to look at including product from a flatbed and snow plows to salters and a brine making machine. Thanks to everyone for coming and the Semi Service employees for putting together a successful open house.
Supreme Van Body
Supreme 16' van body including a 3' attic, .040 pre-painted white sides, cab access with sliding door, translucent roof, laminated oak floor, 1" x 6" Apitong wood side slats, 12" Skuff liner, LED lights, rear swing doors, 24" rear aluminum slider ramp, rear ICC bumper, and mud flaps.
Cottonwood Heights City Hall & New Trucks
We had a lot of fun at the Cottonwood Heights, Utah City Hall open house yesterday! Many community members came out as well as Governor Gary Herbert. Take a look at these all new snow plow Mack Trucks, including Henderson and Rugby Dump bodies, Henderson and Western Sanders, Force America Hydraulics and Western and Henderson Snow Plows, ready for a snowy winter!
An 11' Knapheide custom Service body factory painted White, Rear Colibert receiver hitch including a 7 way flat light receptacle, In bed Curt 30,000# folding ball hitch including an in bed 7 way flat light receptacle.
Custom Platform Deck
Shop fabricated platform deck including headboard, Protech Aluminum tool boxes, Holland Stationary fifth wheel, Poly Fenders including brackets, Spare tire mount, Fabricated aluminum light boxes including LED lights, Rear receiver hitch including a 7 way flat light receptacle.
Custom Service Body
9' Knapheide service body including LED lights, Class V rear hitch with Pintle hook, 7-way flat light receptacle, spray on bed liner including rear bumper, Knapheide ladder rack side mount, Weather Guard side mount ladder rack, Weather Guard 100-gallon transfer tank including a Fill Rite 12 volt transfer pump and a Hanney diesel fuel hose reel including 3/4" fuel hose.
12' X 96" Knapheide flatbed with a wood floor, drop in bulkhead, 40" Tall City Stakes and an ICC bumper.
Reed Hurst Trailer
A complete tanker rebuild including Poly Urathane foam on the entire tanker and trim, installation of ric rack on exterior, installation of aluminum tank wrap including front and rear heads, prep primer and white paint exterior of tanker with a blue suspension, installation of Hendrickson air ride suspension including new axles, alignment of front and rear axles, rewire trailer completely using LED lights including front electrical box, installation of new air lines including air valves and glad hands, installation of ABS roll stability on trailer, connection of auto air inflation system on tandem axles, installation of new front and rear aluminum single axle fenders, black light test and all the HM 183 Tank testing.
Reading Service Body
8' single rear wheel Reading Service Body painted graphite metallic to match the truck, single rear wheel mud flaps, Class V receiver hitch, 7-way light receptacle, roll cover interlocking retractable aluminum cover, and LED compartment lights.
Henderson Mark III
Henderson Mark III 11' Dump body with 13" sides, central hydraulic system, Buyers 18" x 18" X 24" under-body tool box, Buyers buck plate style rear hitch including pintle hook, 7-way light receptacle, Force America fully integrated central hydraulic system, and a 45" LED Federal Signal light bar.
Knapheide EC-Series Service Body
Knapheide EC-Series service body, model EC676F, installed on a GM Colorado / Canyon chassis cab including integrated flip lids, aluminum adjustable shelves, 12" Slam tailgate, factory painted white, Galva Grip Bumper, rear receiver hitch, 7-way flat rear light receptacle and LED lights
CM Flatbed - Model SK
A 8'6" CM model SK flatbed including headache rack, rear receiver hitch, LED lights, 7-way flat light receptacle, Quingy QP-7.5G reciprocating air compressor, Buyers aluminum top side tool boxes, Reelcraft heavy duty hose reels, Samson pump master Pump 3 + 3 system for 120 lb. open top keg plumbed to air compressor, Samson 3/8" mini filter regulator, fabricated 4 barrel holders, Tripp Lite 3000 watt power invertor with 4 GFCI outlets and (4) fabricated shovel holders.